關於詮能
最新消息
合作品牌
Industrial Machinery
Automation & Control
Intelligent Building
Rail
SOLAR
Relay
Dynamic Series Connectors
Terminal Blocks & Strips
Connectors for Renewable Energy
Test & Measure
Lable
Printers
Tape
Lockout Tagout
Solar DC Cable
Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Photovoltaics
Tools for solar
Thermal Interface Materials
Solar Cable Edge Clip
Solar Junction Box
Solar DC Connector
Solar Junction Box
Solar DC Connector
A Series
Ecomate Aquarius Connector
Ecomate Plastic Connector
Meditec
Automation
Wireless
Extreme
智能節電
決策模擬
專題影片
活動剪影
客戶服務
投資人專區
商品分類
所有商品
TE (277)
所有商品
轉角式插座 XELW-4
"右轉角Ø 4 mm插座，黃銅，可對接帶有硬質絕缘套管的Ø 4 mm彈簧式插頭，符合IEC/EN61010-1規定，併帶觸摸保護。插座可以直接焊接在PCB板上，其右轉角的结抅可將因測試導線插入而產生的對線路板的應力減小到最低。
連接方式：Ø 2 mm圓真焊接於PCB板上"
"For mounting on printed circuit boards, touch-protected according to IEC/EN 61010-1. The socket is directly soldered onto printed circuit boards.The right-angled configuration minimizes the force transmitted to the printed circuit board through the plugged-in test lead.
Right-angled Ø 4 mm rigid socket accept ing spring-loaded Ø 4 mm plugs with rigid insulating sleeve. Machined brass.
Connection:Ø 2 mm round pin and contacts for mounting on printed circuit boards."
轉角式插座 XELW-4
"右轉角Ø 4 mm插座，黃銅，可對接帶有硬質絕缘套管的Ø 4 mm彈簧式插頭，符合IEC/EN61010-1規定，併帶觸摸保護。插座可以直接焊接在PCB板上，其右轉角的结抅可將因測試導線插入而產生的對線路板的應力減小到最低。
連接方式：Ø 2 mm圓真焊接於PCB板上"
"For mounting on printed circuit boards, touch-protected according to IEC/EN 61010-1. The socket is directly soldered onto printed circuit boards.The right-angled configuration minimizes the force transmitted to the printed circuit board through the plugged-in test lead.
Right-angled Ø 4 mm rigid socket accept ing spring-loaded Ø 4 mm plugs with rigid insulating sleeve. Machined brass.
Connection:Ø 2 mm round pin and contacts for mounting on printed circuit boards."
螺纹連接適配器 VARIOGRIP-5
"該適配器用於快速安全連接内六角螺纹/螺栓。鈕轉把手后端的按鈕打開六角尖端，以便適配器正好符合尺寸為5 mm或6 mm扳手的内部六邊形。這樣可以實現多點接觸和低接觸電阻。適配器在
負載下也可以用手操作。適配器内的Ø 4 mm插座可對接帶硬質絕缘套管的彈簧式Ø 4 mm插頭。
兩種不同設計
■■ 5 mm設計配有灰色按鈕
■■ 6 mm設計配有黑色按鈕"
"For fast, safe connection to screws/bolts with internal hexagon. Twisting the button on the back of the handle spreads the hexagonal tip so that the adapter fits firmly
into internal hexagons with 5 mm or 6 mm wrench size. This results in multiple contact points that enable low contact resistance.The adapter can also be operated by hand when under load. The fixed Ø 4 mm socket in insulator is suitable for fitting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Two different designs:
■ 5 mm design with gray button
■ 6 mm design with black button"
螺纹連接適配器 VARIOGRIP-5
"該適配器用於快速安全連接内六角螺纹/螺栓。鈕轉把手后端的按鈕打開六角尖端，以便適配器正好符合尺寸為5 mm或6 mm扳手的内部六邊形。這樣可以實現多點接觸和低接觸電阻。適配器在
負載下也可以用手操作。適配器内的Ø 4 mm插座可對接帶硬質絕缘套管的彈簧式Ø 4 mm插頭。
兩種不同設計
■■ 5 mm設計配有灰色按鈕
■■ 6 mm設計配有黑色按鈕"
"For fast, safe connection to screws/bolts with internal hexagon. Twisting the button on the back of the handle spreads the hexagonal tip so that the adapter fits firmly
into internal hexagons with 5 mm or 6 mm wrench size. This results in multiple contact points that enable low contact resistance.The adapter can also be operated by hand when under load. The fixed Ø 4 mm socket in insulator is suitable for fitting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Two different designs:
■ 5 mm design with gray button
■ 6 mm design with black button"
螺纹連接適配器 VARIOGRIP-5
"該適配器用於快速安全連接内六角螺纹/螺栓。鈕轉把手后端的按鈕打開六角尖端，以便適配器正好符合尺寸為5 mm或6 mm扳手的内部六邊形。這樣可以實現多點接觸和低接觸電阻。適配器在
負載下也可以用手操作。適配器内的Ø 4 mm插座可對接帶硬質絕缘套管的彈簧式Ø 4 mm插頭。
兩種不同設計
■■ 5 mm設計配有灰色按鈕
■■ 6 mm設計配有黑色按鈕"
"For fast, safe connection to screws/bolts with internal hexagon. Twisting the button on the back of the handle spreads the hexagonal tip so that the adapter fits firmly
into internal hexagons with 5 mm or 6 mm wrench size. This results in multiple contact points that enable low contact resistance.The adapter can also be operated by hand when under load. The fixed Ø 4 mm socket in insulator is suitable for fitting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Two different designs:
■ 5 mm design with gray button
■ 6 mm design with black button"
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
插頭 XZGL-425
"用於自组裝的測試導線，Ø 4 mm，堆疊式插頭，採用MULTILAM技術。產品帶有伸缩套管可防止意外觸摸。由於插頭裝有防護頸圈，電器間隙和爬電距離增加，因此，裝配此款插頭后，即使一些老式測試儀器没有安裝安全插座，不符合高達600 V CATII的安全標準，測試導線也可以與之安全連接。
螺纹連接"
"Stackable, Ø 4 mm, with spring-loaded MULTILAM,
for self-assembly of test leads.With retractable sleeve to prevent accidental touching. As a result of the protective collar,the clearances and creepage distances allow test leads equipped with this plug also to be
safely connected to older test instruments not yet fitted with safety sockets up to 600 V,CAT II in accordance with the standards.
Screw connection."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。
" "The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box